| TUTORIAL: Surface Modeling in Pro/ENGINEER Wildfire – Revolve (Bottle Tutorial 1) |
TUTORIAL: Surface Modeling in Pro/ENGINEER Wildfire – Revolve (Bottle Tutorial 1)Versions: Pro/E Wildfire, Wildfire2.0, Wildfire3.0This tutorial is the 1st step of the Bottle’s Surface Modeling tutorial for Pro/ENGINEER Wildfire. The feature covered in this tutorial is Revolve, a basic surface modeling tool. Revolve feature has been modernized since the first ProE Wildfire version. Revolve dashboard will appears when you activate the revolve command. Options on revolve dashboard include protrusion, surface, thin protrusion and cut (remove material). This tutorial, we are going to create a revolve surface. Click here to download the file used in this tutorial. 2. To create revolve surface, click insert > revolve 3. Next, press and hold the right mouse button (RMB), select Define Internal Sketch from the pops up menu. 4. Select the CTR_TOP plane as the sketching plane and DTM2 for sketch orientation plane. When you are done, hit the sketch button or press the middle mouse button (MMB) to start the sketch. 5. Draw lines and dimension the sketch as shown in the image below 6. Click the check button 7. Next hit the check button
TUTORIAL: Surface Modeling in Pro/ENGINEER Wildfire – Revolve (Bottle Tutorial Part1) TUTORIAL: Advanced Surface Modeling in Pro/ENGINEER Wildfire – Sweep Blend (Bottle Tutorial Part4) TUTORIAL: Surface Modeling in Pro/ENGINEER Wildfire – Extend Surface (Bottle Tutorial Part5) TUTORIAL: Surface Modeling in Pro/ENGINEER Wildfire – Merge Surface (Bottle Tutorial Part6) TUTORIAL: Surface Modeling in Pro/ENGINEER Wildfire – Rounds (Bottle Tutorial Part7) TUTORIAL: Surface Modeling in Pro/ENGINEER Wildfire – Thicken Surface (Bottle Tutorial Part8)
|
. After that, click the surface options 
in the revolve tool dashboard.
to confirm the sketch. You should get the light weight preview for the Revolve Surface by now.
on the dashboard to confirm the revolve surface.