|
TIPS: List of hidden config.pro in Pro/ENGINEER |
TIPS: List of hidden config.pro in Pro/ENGINEER Version: Pro/E 2001, Wildfire, Wildfire2.0, Wildfire3.0
Since it is called hidden config.pro, there is no official document that we can refer to. These are some of the hidden config.pro as I know off. I believe there is more hidden config.pro that is not listed in the table below. Should you find any, please feel free to share with us by sending an email to support(a)proengineertips.com**
** (a) = @
| Hidden config.pro options | Description | enable_auto_constr (no, yes) | Resolving the problem when the assembly constrains ‘mate’ change to ‘insert’ when assembling components. | allow_copy_with_ext_refs (no, yes) | error message : "cannot mirror some features of this part" This is caused by the external references in the feature which we wish to mirror. | allow_round_all (no, yes) | Enable the all rounds options in the round tool. You are able to select ‘all convex rounds’ or ‘all concave rounds’ or both together when set to yes. For detail, please visit TIPS: How to add rounds to all the sharp edges in Pro/E | udf_tol_std_chk (no, yes) | error message : "The UDF Tolerance Standard is Missing” This happen when the system could not find the UDF’s reference part and hence could not update the UDF. | disable_search_path_check (no, yes) | Need to wait for a long time after creating a new part or renaming a part. Pro/ENGINEER will check the search path listed in your config.pro if the same model name exists. This happen when you are using a high number of search path. | hlr_normal_surface_tol (Real Number) -tolerance | hlr – hidden line removal Lines or planar surfaces which are within the angular tolerance are not visible in part or drawing mode. >> Another similar options (hidden) in drawing options (*.dtl) “drw_hlr_normal_surface_tol” |
 INFO: What is a hidden config.pro option in Pro/ENGINEER?
|
Configuration and MISC 
