TIPS: Pro/ENGINEER Wildfire edge_display_quality config.pro optionVersion: ProE 2001, Wildfire, Wildfire 1.0, Wildfire 2.0, Wildfire 4.0 
edge_display_quality = Low
edge_display_quality = Very High
edge_display_quality config.pro option controls the edge display quality for wireframe and hidden-line in Pro/E.
The values for edge_display_quality config.pro option are
Low - Decreases tessellation from normal
Medium * - Normal quality of edge display.
High - Increases tessellation by 2.
Very_high - Increases tessellation by 3.
* default value
Setting the value to Low will speed up the display but scarifying the display quality. Very High value gives you smooth edge but it consumes more graphic memories. |
|
TIPS: Pro/ENGINEER Widfire web_browser_homepage config.pro optionVersion: ProE Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0 web_browser_homepage config.pro option in Pro/ENGINEER Wildfire allows you to set the default web page of Pro/E browser home page. The default web page in Pro/E Wildfire is PTC - Pro/ENGINEER Wildfire 2.0 User Tools .
You can change it to any other web site by putting the URL in the web_browser_homepage config.pro option’s value.
web_browser_homepage http://www.proengineertips.com
If internet connection is not available in the Pro/E workstation, you can set the value to any local page or a blank page to shorten the searching and loading time.
web_browser_homepage http:// |
|
|
TIPS: sketcher_save_preview_image config.pro option in Pro/ENGINEER Version: ProE 2001, Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0 sketcher_save_preview_image config.pro option allows you to save the ProE section files (.sec) with embedded image information which can be used for previewing in File/Open dialog. The default value for sketcher_save_preview_image config.pro option is no.
sketcher_save_preview_image
Yes – Preview image information embedded
No* – Preview image information not embedded |
|
TIPS: Reduce Pro/ENGINEER File Size by using the compress_output_files config.pro optionVersion: ProE 2001, Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0 compress_output_files config.pro option allows you to compress object files via the save command. ProE object files that supported the compression are ProE Part file (.prt), ProE Assembly file (.asm) and ProE Drawing file (.drw). The extension for the compress object files will remain after compression and it is fully compatible across systems.
compress_output_files
Yes - Saves object files in compressed format.
No - Saves object files in non compressed format. |
|
Read more...
|
|
TIPS: prompt_on_exit config.pro option in Pro/ENGINEER
Version: ProE 2001, Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0
prompt_on_exit config.pro option determines if you are prompted to save objects when exiting a Pro/ENGINEER session. The default value for prompt_on_exit config.pro option is no*. Change it to yes to get the prompt at the message area when exiting.
prompt_on_exit yes / no* 
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
| Results 1 - 15 of 20 |
ProENGINEER 